翅片管系列
钢铝复合翅片机
300*80铝制闭式暖气片
干式、湿式大型空冷器
热管换热器
TLS型铜铝串片式热交换器
TL型高效换热器
SRZ型散热器
H6645型散热器
SST树脂整理机组散热器
SRL型散热器
FUL型浮头式油加热散热器
GL II型散热排管
U II型散热排管
S型散热排管
空气冷却器
螺旋板式换热器简介
列管换热器、冷凝器
冲片模具
铝带螺旋卷绕机
TSR盘管
 

浅谈我厂翅片管产品的各方面性能与质量

翅片管选购合格产品,上下对口表面应在一个平面上,不得歪斜.对口中心距离准确,对丝与翅片管内螺纹的松紧应适度,间隙不可过大.垫片不得使用橡胶垫或核胶掺石棉的合成垫,必须使用橡胶石棉垫(又称石棉橡胶垫,它是用橡胶石棉板冲制加工的垫片),其厚度为1.0-1.5mm,不能用双垫.可多了解下橡胶石棉板的牌导和规格.表中分高压、中压、低压三种牌号,常用的是中压板和低压板冲制的垫片.中压垫片在使用前应在机油里浸泡几分钟;低压板垫片应在机油里蘸一下捞出来控干.使用时将垫片放人已调和(用清油调和)稀稠适度的铅油桶里搅动,捞出来且不流淌,或轻度流淌即可使用.
When selecting qualified products for finned tubes, the upper and lower counterparts should be on a plane and should not be skewed. The center distance of the counterparts should be accurate, the thread tightness between the wire and the finned tubes should be moderate and the clearance should not be too large. The gaskets should not use rubber pads or synthetic asbestos pads mixed with nuclear rubber, but must use rubber asbestos pads (also known as asbestos rubber pads), which are made of rubber asbestos. The thickness of gaskets for punching process of cotton board is 1.0-1.5mm, so they can not be used with double gaskets. We can learn more about the brand guide and specifications of rubber asbestos board. In the table, there are three grades of high pressure, medium pressure and low pressure. The gaskets commonly used are those made of medium pressure plate and low pressure plate. Medium pressure gaskets should be soaked in oil for several minutes before use; low pressure plate gaskets should be dipped in oil. Put the gasket in a moderately thick lead oil barrel that has been blended (with clear oil) and agitate it when used. Remove the gasket without flowing or slightly flowing. 我们可以多咨询,尽可能多地了解产品制作的工艺流程.面对形形色色的翅片管产品,内行看门道,外行只能看热闹.虽然各类产品外观差别不大,但不同品牌的翅片管产品在工艺流程上却有很多的不同,这种差异性往往决定了产品品质的好坏.目前,新型翅片管产品制作工艺流程的差别关键表现在对表面喷涂处理和内防腐的处理上.由于新型翅片管在材质、生产工艺、使用功能等方面自身的特征,因此在表面处理方面也提出了更高的要求.凯捷首次将新型阴极电泳技术引入翅片管行业,为国内的消费者带来了前所未有的产品性能和外观,掀起了翅片管行业的一场革命,凯捷也成为目前市场上最先推出阴极电泳技术的翅片管品牌.阴极电泳涂层后,表面饱满光洁,色彩亮丽.充分利用技术手段,不断提高产品的性能,成为不少国内企业获取竞争优势的重要武器.
We can consult as much as possible to understand the process of product manufacturing. Faced with various finned tube products, professional doorway, layman can only watch the lively. Although the appearance of various products is not very different, but different brands of finned tube products have many differences in the process, which often determines the quality of products. At present, the key difference in the manufacturing process of new finned tube products lies in the treatment of surface spraying and internal corrosion protection. Because of the characteristics of new finned tube in material, production process and use function, higher requirements are put forward in surface treatment. Kaijie first introduced new cathodic electrophoresis. The introduction of technology into the finned tube industry has brought unprecedented product performance and appearance to domestic consumers, triggered a revolution in the finned tube industry, and Kaijie has become the first finned tube brand to introduce cathodic electrophoresis technology in the current market. Improving the performance of products has become an important weapon for many domestic enterprises to gain competitive advantages.辛苦整理.转载请注明http://www.wxsxsjx.com

本文关键词:翅片管 来源: 浏览次数:814 打印本页 关闭窗口
版权所有:无锡市新圣机械制造有限公司   地址:无锡市太湖镇雪浪许舍   电话:0510-85554369  传真:0510-85554369  手机:18651567610   联系人:朱经理
邮编:214142   网址:www.wxsxsjx.com  邮箱:445930736@qq.com   苏ICP备11027607号-3                         技术支持:无锡易商科技
link:翅片管