翅片管系列
钢铝复合翅片机
300*80铝制闭式暖气片
干式、湿式大型空冷器
热管换热器
TLS型铜铝串片式热交换器
TL型高效换热器
SRZ型散热器
H6645型散热器
SST树脂整理机组散热器
SRL型散热器
FUL型浮头式油加热散热器
GL II型散热排管
U II型散热排管
S型散热排管
空气冷却器
螺旋板式换热器简介
列管换热器、冷凝器
冲片模具
铝带螺旋卷绕机
TSR盘管
 

翅片管换热器原理—翅片管换热器的特点

换热器是一种非常好的节能设备,可以将原本会浪费掉的能量加以重新利用,翅片管换热器就是换热器大家庭的一员,今天翅片管厂家小编就来为大家介绍下翅片管换热器的一些工作原理以及它的特点等情况,方便大家对于翅片管换热器有一个更加好的了解。
Heat exchanger is a very good energy-saving equipment, which can reuse the energy that would have been wasted. Fin-tube heat exchanger is a member of the heat exchanger family. Today, the fin-tube manufacturer Xiaobian will introduce some working principles and characteristics of fin-tube heat exchanger for you, so as to facilitate your understanding of fin-tube heat exchanger. The film tube heat exchanger has a better understanding.
翅片管换热器原理—翅片管换热器的特点
The principle of finned tube heat exchanger -- characteristics of finned tube heat exchanger
1.传热效率高 由于翅片对流体的扰动使边界层不断破裂,因而具有较大的换热系数;同时由于隔板、翅片很薄,具有高导热性,所以使得翅片管换热器可以达到很高的效率。
1. Heat transfer efficiency is high because the fin disturbance to the fluid causes the boundary layer to break up continuously, so it has a larger heat transfer coefficient. At the same time, because the partition and fin are very thin and have high thermal conductivity, the fin-tube heat exchanger can achieve high efficiency.
2.紧凑 由于翅片管换热器具有扩展的二次表面,使得它的比表面积可达到1000㎡/m3。
2. Compact finned-tube heat exchanger has an extended secondary surface, so its specific surface area can reach 1000_/m3.
3.轻巧 原因为紧凑且多为铝合金制造,现在钢制,铜制,复合材料等的也已经批量生产 。
3. The reason for lightness is compact and mostly made of aluminium alloy. Now steel, copper and composite materials have been produced in batches.
4.适应性强 翅片管换热器可适用于:气-气、气-液、液-液、各种流体之间的换热以及发生集态变化的相变换热。通过流道的布置和组合能够适应:逆流、错流、多股流、多程流等不同的换热工况。通过单元间串联、并联、串并联的组合可以满足大型设备的换热需要。工业上可以定型、批量生产以降低成本,通过积木式组合扩大互换性。
4. The finned-tube heat exchanger with strong adaptability can be applied to heat transfer between gas-gas, gas-liquid, liquid-liquid and various fluids, as well as phase change heat transfer with collective change. Through the arrangement and combination of the runners, it can adapt to different heat transfer conditions, such as countercurrent, cross flow, multi-stream, multi-pass flow and so on. Through the combination of units in series, parallel connection and series parallel connection, the heat exchange needs of large equipment can be satisfied. Industry can be stereotyped and mass produced to reduce costs and expand interchangeability through building blocks.
5.制造工艺要求严格 工艺过程复杂。容易堵塞,不耐腐蚀,清洗检修很困难,故只能用于换热介质干净、无腐蚀、不易结垢、不易沉积、不易堵塞的场合。
5. the manufacturing process is strict and the process is complicated. It is easy to plug, not corrosion-resistant and difficult to clean and repair, so it can only be used in situations where heat transfer media are clean, non-corrosive, not easy to scale, not easy to deposit and not easy to plug.
以上就是为大家介绍的翅片管换热器的一些工作原理及特点,希望大家可以参考了解,当我们大家以后需要购买使用翅片管换热器的话,相信肯定可以给我们带来非常不错的使用效果,节省更多的能量资源。
The above is to introduce some of the working principles and characteristics of finned tube heat exchanger, I hope you can refer to understand, when we need to buy the use of finned tube heat exchanger in the future, I believe that it can certainly bring us a very good use effect, save more energy resources. 辛苦整理.转载请注明http://www.wxsxsjx.com

本文关键词:翅片管 来源: 浏览次数:2372 打印本页 关闭窗口
版权所有:无锡市新圣机械制造有限公司   地址:无锡市太湖镇雪浪许舍   电话:0510-85554369  传真:0510-85554369  手机:18651567610   联系人:朱经理
邮编:214142   网址:www.wxsxsjx.com  邮箱:445930736@qq.com   苏ICP备11027607号-3                         技术支持:无锡易商科技
link:翅片管